Building a temp boat shed - ideas

[Ed Snyder]

Here's how I built mine.

1 3/4" ele conduit, 14' lengths, 2 1/2 lengths per 'rib' at 6 to 7' spacings.
Rondo 28mm furring channels (used in office fit-outs)
And steel stud - various sizes - what I had around. Drywall screwed to the ele conduit.
Bottom 'plate' has holes drilled for the conduit to be screwed once in the hole.
A 9M X 6M tarp stretched over this worked suburb!
The back structure is 2" poly panels (fridge panels) of a site some where....
Lights out of a rubbish skip I went past on a commercial building site. Think the ladder came from the same bin.....

[Ed Snyder]

Tarp on

[Ed Snyder]

Tarp on

Woops, wrong pic, this was the first temp shed, I used 1 1/4"  ele conduit - didn't like the extra height when it came to build the higher shed, and the wind blew it around too much.

[Saxe Point]

Still looks like a real nice shed.

[Ed Snyder]

Still looks like a real nice shed.

Tell my neighbors Saxe!

[Brian.Dixon]

Still looks like a real nice shed.

Tell my neighbors Saxe!

Yuk yuk... I once saw a temporary shelter on top of my neighbor's house, upside down.  Prior to that, it was in another neighbor's back yard a few houses up the street...

Brian

[Ed Snyder]

Still looks like a real nice shed.

Tell my neighbors Saxe!

Yuk yuk... I once saw a temporary shelter on top of my neighbor's house, upside down.  Prior to that, it was in another neighbor's back yard a few houses up the street...

Brian

Yup lol, picked mine off the fence a few times.
Going for a $2k lid this time.....