Forgive me father, for I have sinned... Its been 4 months since I my last worked on my boat. Life gets in the way sometimes and part time boat builder is faced with many challenges.
I promise to re-sand re-clean, apply fairing compound and sand some more then add the exterior glass. I have no vision of finishing this year and I will be ok with that, setting my sights on next year for the launch.
One thing I discovered was that the keel was not flat / fair as I wanted so I used a long strait edge covered with box tape and put a bead of silica thickened epoxy to make a flat keel and fair. I have since applied fairing compound to blend the keel into the bottom nice, the 2 rows of glass tape are blended in good now. I could have faired it all later after applying glass but it bothered.
I tried to use tap-talk but there is an error.
I should be able to start putting glass on the hull this coming weekend. I will add some pics soon.