Kodiak 31' 4"' OAL 9'6" Beam West Coast Boat Works, Bend OR.

[Grady300]

Here's a few inside photos

[Todd j]

Looks great!

[Rbob]

So cool to see it come together, its going to be awesome boat!

[Grady300]

Thanks for the compliments! Got her on the trailer today. had to build a ramp with pallets to get the trailer up to the right height. Then just cranked the winch and pushed with the forklift. Still have a good solid week of finishing odds and ends.

[Rbob]

Nice job getting it on the trailer.  Your extended tongue, how much longer is it?  Loaded mine today and I think I am going to need more room also.

[Todd j]

I have the same trailer as you and Rbob.  Did Sandy ask you for any pictures or elevations, or any supplemental info?   He did from me.  I believe my trailer is slightly modified/lengthened, but I’m not sure.  Looks like some sort of roller support will be needed to protect the bottom at the bow with this trailer/boat combo

[Grady300]

I have the same trailer as you and Rbob.  Did Sandy ask you for any pictures or elevations, or any supplemental info?   He did from me.  I believe my trailer is slightly modified/lengthened, but I’m not sure.  Looks like some sort of roller support will be needed to protect the bottom at the bow with this trailer/boat combo

If I raise my bunks I should be ok without the front roller. The bunks are in the lowest position. My advise with these trailers is when you order it have them move the main bunks to the highest position or do it when you get the trailer.

[Grady300]

Nice job getting it on the trailer.  Your extended tongue, how much longer is it?  Loaded mine today and I think I am going to need more room also.

Here are all my specks

[Todd j]

I should have bought mine when you did.   I’m paying almost 4000$ dollars more.   Everything keeps going up and up.  I will raise the bunks before I put the boat on. 

[Grady300]

I should have bought mine when you did.   I’m paying almost 4000$ dollars more.   Everything keeps going up and up.  I will raise the bunks before I put the boat on.

WOW that's a HUGE increase!!!

[Rbob]

I should have bought mine when you did.   I’m paying almost 4000$ dollars more.   Everything keeps going up and up.  I will raise the bunks before I put the boat on.

A tip,  take off the nuts and put anti seize on everything that you think you will be adjusting.
 Just unscrewing one of my bolts ruined it, went to town and bought a couple more and glad I did because I wrecked another.  Most of the bolts are not very tight so they came off easy.

Stainless is "sticky"

[Grady300]

Wow, I'll be doing some adjustments thanks for the heads up

[Scott L]

Very nice , can't wait to see how it performs.

[Rbob]

Wow, I'll be doing some adjustments thanks for the heads up

I am looking into a Keel roller, maybe another crossmember and move the target bunks forward or add short ones.  Mine is awful close to the front crossmember.

It looks like you have some kind of guard up front, something you added?

[json]

I consulted with the manufacturer of my trailer, he shipped me some taller front bunk supports because my boat was sitting low towards the front. My boat was close to hitting the front cross member on my trailer until I lifted the front bunks and leveled the keel, now it's not even close. I still need to do some micro adjustments, but gonna wait until I put the boat in the water to do those. The anti-sieze idea is a good one, thanks Rbob...