Author Topic: Epoxy and Western Red Cedar  (Read 288 times)

0 Members and 1 Guest are viewing this topic.


  • Midshipman
  • *
  • Posts: 21
    • View Profile
    • Email
Epoxy and Western Red Cedar
« on: April 13, 2022, 10:44:32 AM »
 A question on Western Red Cedar will it take epoxy and is it structurally strong enough? I would use it for the pilot house roof and berth roof. The wood is clear 2x10x16, 5/4x10x20. Im guessing it should. Thanks so much


  • Administrator
  • Admiral
  • *****
  • Posts: 2303
    • View Profile
    • Glacier Boats of Alaska
Re: Epoxy and Western Red Cedar
« Reply #1 on: April 13, 2022, 03:57:29 PM »

The cedar should be just fine.  Some say the oils and aromatics in it make it hard to bond with epoxy, but I doubt that ... the wood is porous and thousands of cedar wood-strip canoes have been built and coated with epoxy and fiberglass with great success.  If it worries you, wipe it down with acetone and proceed...

The Great Alaskan - Professional performance - Easy to build! -  ><((((> .`.><((((> .`.><((((> .`.><((((>