Author Topic: Some joinery pic's - off the internet for ideas (Read 4867 times)

Ed Snyder · « **on:** January 02, 2015, 03:13:36 AM »

I love searching in innernet looking at other builds.

Some pix I D/L'd for ideas to finish the joinery in the boat.

Here are a few to wet ur whistle!

Ed Snyder · « **Reply #1 on:** January 02, 2015, 03:17:16 AM »

More here, I just love looking at totally timer finishes.... thinking ahead.... a lot of maintenance?

Ed Snyder · « **Reply #2 on:** January 02, 2015, 03:25:57 AM »

The teak grate looks interesting, it's a curved one too......

I like the cedar(?) hull liner up frd..... Have built a few like this, quick and if the 1 3/4" x 3/8" slats are pre finished all that is needed is to seal the cuts as they are pin gunned onto 3/4" sq vertical ribs at say 12" centers.
A squirt of construction sealant behind the nails works, Sikaflex is great stuff, flexible and will not come off easily.
A tip, use 1/4 sawn slats, more grain is featured, personal preferences count...

Cannon · « **Reply #3 on:** January 03, 2015, 01:42:29 PM »

I like the center mounted helm!
I also think that is one hell of a big cuddy!

Ed Snyder · « **Reply #4 on:** January 04, 2015, 07:24:03 AM »

Yea Cannon, although, hopping out the side sliding hatch, running frd to grab the dock lines..........

News:

Author Topic: Some joinery pic's - off the internet for ideas (Read 4867 times)

Ed Snyder

Some joinery pic's - off the internet for ideas

Ed Snyder

Re: Some joinery pic's - off the internet for ideas

Ed Snyder

Re: Some joinery pic's - off the internet for ideas

Cannon

Re: Some joinery pic's - off the internet for ideas

Ed Snyder

Re: Some joinery pic's - off the internet for ideas