Author Topic: 3/4 flooring?  (Read 50 times)

0 Members and 1 Guest are viewing this topic.

Tom Freeburg

  • Midshipman
  • *
  • Posts: 6
    • View Profile
3/4 flooring?
« on: July 09, 2020, 12:27:35 PM »
Full disclosure here.  I am building a 25 1/2 Tolman Jumbo, and using Brian’s construction manual as a guide because of the included details.
My question:  I bought 18mm Aquatec, not realizing it is acceptable to use 1/2 for the cabin and fish decks.  Due to the Covid issues I cannot return or even exchange it.  I am probably adding a lot of unneeded weight, yes?  Can I skimp on the underfloor supports?  (I think not)

Any suggestions?

Thx

Brian.Dixon

  • Administrator
  • Commodore
  • *****
  • Posts: 1650
    • View Profile
    • Glacier Boats of Alaska
Re: 3/4 flooring?
« Reply #1 on: July 09, 2020, 12:46:36 PM »

Thanks for the kind words!

Very roughly figuring out the added weight, using 22' of deck that's 8' wide (this is LARGER than what you are doing), I calculate 3.6 cubic feet of extra wood ... at around 40# per cubic feet of fir plywood, that's only about 140#.  Your boat won't even know it's there ... Carry on.  Don't skimp on the under-deck structure.

Brian

The Great Alaskan - Professional grade offshore performance - Designed to be built by anyone! - https://www.glacierboats.com  ><((((º> ¸.·´¯`·.¸¸><((((º> ¸.·´¯`·.¸¸><((((º> ¸.·´¯`·.¸¸><((((º>